鉸刀修磨產品介紹

伊爾耐德（天津）科技的鉸刀修磨服務，專注于提升鉸刀的切削性能和使用壽命。

鉸刀修磨的具體步驟包括：

首先，對鉸刀進行仔細檢查，包括鉸刀的外觀、尺寸規格以及切削刃的磨損情況等，對鉸刀的初始狀態進行全面了解。

然后，使用高精度的測量儀器對鉸刀進行精確測量，獲取刀具的直徑變化、錐度偏差、切削刃粗糙度等關鍵數據。

接著，根據測量數據進行分析，依據鉸刀的材質、型號和加工要求，制定詳細的修磨方案，明確修磨的具體步驟和參數。

之后，將鉸刀固定在專業的磨床上，運用高精度的磨削工藝和磨削材料，對鉸刀的切削刃進行精細磨削，恢復切削刃的鋒利度。磨削過程中，要注意控制磨削速度、進給量和磨削深度，避免對鉸刀造成損傷。

最后，修磨完成后，對鉸刀進行再次檢測校驗，檢查鉸刀的各項指標是否達到高質量標準，如孔徑加工的精度、表面質量等方面。確保修磨后的鉸刀能夠在加工過程中展現出優異的切削性能，顯著提高加工效率和成品質量，減少孔徑的錐度和橢圓度。

Reamer Grinding Product Introduction

lrnide(Tianjin) Technology focuses on improving the cutting performance and service life of the reamer.

The specific steps of reamer grinding include:

First, carefully inspect the reamer, including the appearance, size specifications and wear of the cutting edge, and have a comprehensive understanding of the initial state of the reamer.

Then, use high-precision measuring instruments to accurately measure the reamer to obtain key data such as tool diameter change, taper deviation, and cutting edge roughness.

Then, analyze the measured data, formulate a detailed grinding plan based on the material, model and processing requirements of the reamer, and clarify the specific steps and parameters of grinding.

After that, fix the reamer on a professional grinder, use high-precision grinding technology and grinding materials to finely grind the cutting edge of the reamer to restore the sharpness of the cutting edge. During the grinding process, pay attention to controlling the grinding speed, feed rate and grinding depth to avoid damage to the reamer.

 Finally, after grinding, the reamer is inspected and calibrated again to check whether the various indicators of the reamer meet the high quality standards, such as the accuracy of hole processing, surface quality, etc. This ensures that the reamer after grinding can show excellent cutting performance during the processing, significantly improve the processing efficiency and quality of the finished product, and reduce the taper and ovality of the hole.